WILAPLAT bright silver plating is to be used in a conventional electroplating system.
Prior to galvanic treatment, the surfaces to be coated must be clean and free from grease.
In order to avoid a current-free and therefore non-sticky silver coating, the rectifier must be switched on when the goods are submerged.
Characteristics:
Silver content: 30.0 g/l
Cyanide content: 120.0 g/l
Temperature: 20 - 30 ° C
Exposure time: 5 - 50 minutes
Voltage: 0.5 - 1.2 volts
Current density: 1.0 - 1.5 A / dm²
Deposition: 66.7 mg / amine
Movement: required
Anodes: fine silver
Bowl material: glass, alkali resistant. Plastic (PP, PVC, etc.)
Precipitation data: Density 10.3 g / cm³
Hardness: approx 110 HV
The product contains cyanides and is classified as very toxic.
Not to be associated with acids or acidic solutions
Prior to galvanic treatment, the surfaces to be coated must be clean and free from grease.
In order to avoid a current-free and therefore non-sticky silver coating, the rectifier must be switched on when the goods are submerged.
Characteristics:
Silver content: 30.0 g/l
Cyanide content: 120.0 g/l
Temperature: 20 - 30 ° C
Exposure time: 5 - 50 minutes
Voltage: 0.5 - 1.2 volts
Current density: 1.0 - 1.5 A / dm²
Deposition: 66.7 mg / amine
Movement: required
Anodes: fine silver
Bowl material: glass, alkali resistant. Plastic (PP, PVC, etc.)
Precipitation data: Density 10.3 g / cm³
Hardness: approx 110 HV
The product contains cyanides and is classified as very toxic.
Not to be associated with acids or acidic solutions
- Availability: 1 In Stock
- Model: BAN075
-
Brand:
Reviews
There are no reviews for this product.
