Watchmaking
Miscellaneous tools for watchmakers
Watchmaker's Hammer 50x10 mm (MAR010)
Especially light Swiss-style watchmaker's hammer. Especially suitable for jewelry and watchmaking work.
Characteristics:
Flat part diameter: 11mm
Characteristics:
Flat part diameter: 11mm
Quartz Movement Holder (REL010)
Screw support for quartz movements.
Grip diameter 20 - 35 mm.
Grip diameter 20 - 35 mm.
Oil for Watches (REL020)
Oil for wristwatches and precision mechanics.
Content: 10 ml
Content: 10 ml
Jaxa Type Watch Opener (REL005)
Jaxa type watch opener, to open all watch boxes.
Includes 12 keys of variable shapes: round, flat, square and curved.
Characteristics:
Maximum capacity: 34 mm
Includes 12 keys of variable shapes: round, flat, square and curved.
Characteristics:
Maximum capacity: 34 mm
Pointer Extractor (REL016)
Auxiliary key to remove minute or second hands from wristwatches without damaging them.
Bracelet Holder (REL009)
Bracelet holder in gray plastic with grooves, from 2.5 to 4.0 mm.
Dimensions: 50 x 50 x 25 mm
Dimensions: 50 x 50 x 25 mm
Battery Charge Tester (REL004)
Tester for checking the battery charge status.
It is used to measure AC / DC voltage and check the resistances in 1.5 / 3 / 4.5 / 6/9/12 and 22.5 V batteries.
It incorporates a side button for quick measurement.
Watchmaker's Brush (POL443)
Watchmakers brush with fine bristles with metal clamp and plastic handle.
Mixed Watch Hammer (REL064)
Mixed watchmakers hammer, brass head with plastic insert, aluminum handle.
Characteristics:
Total length 240mm
Head dimensions 50 x 14 mm
Characteristics:
Total length 240mm
Head dimensions 50 x 14 mm
Punches to Remove Pins (REL012)
Assortment of 3 punches to remove pins from bracelets ( 0.60 - 0.80 - 1.00 mm).
Numbered and screw punches.
Length of about 58mm
Numbered and screw punches.
Length of about 58mm
Inspection Mirror (REL068)
Inspection mirror so you can see difficult areas that may be out of your direct line of sight.
Polywatch 5g Tube (REL062)
Special polishing paste to remove scratches in plastic watch glasses quickly and inexpensively using the do-it-yourself method.
The tube content of 5g is sufficient for approx. 10-12 applications. Deep scratches require repeated treatment.
The material removal is less than when polishing the glasses with polishing machines and the scratched areas can be treated more specifically.
The tube content of 5g is sufficient for approx. 10-12 applications. Deep scratches require repeated treatment.
The material removal is less than when polishing the glasses with polishing machines and the scratched areas can be treated more specifically.
Jaw For Holding Clock Cases (REL006)
Jaw made of aluminum to hold watch cases with 4 plastic pins.
These movable pins allow you to adjust the bracket to fit any watch. It can be mounted on a bench.
Characteristics:
Maximum capacity: 35mm diameter
Approximate weight: 140 grs
These movable pins allow you to adjust the bracket to fit any watch. It can be mounted on a bench.
Characteristics:
Maximum capacity: 35mm diameter
Approximate weight: 140 grs
3 Oilers (REL017)
3 oilers with dust protection cap.
Sizes 0.3, 0.4 and 0.5mm.
Total length 60mm.
With plastic bag.
Sizes 0.3, 0.4 and 0.5mm.
Total length 60mm.
With plastic bag.
Set 9 Watchmaker's Screwdrivers (REL003)
Set of 9 watchmakers screwdrivers with swivel base and spare bits.
Characteristics:
Tip Size: 0.60 / 0.80 / 1.00 / 1.20 / 1.40 / 1.60 / 2.00 / 2.50 and 3.00 mm
Approximate Weight: 450 grams the set
Characteristics:
Tip Size: 0.60 / 0.80 / 1.00 / 1.20 / 1.40 / 1.60 / 2.00 / 2.50 and 3.00 mm
Approximate Weight: 450 grams the set
Screwdriver Set with Fixed Base (REL014)
Set of 9 watchmakers screwdrivers with fixed base and replacement tips.