Solder paste for 18 k gold from Hilderbrand. It can be used in different areas of the parts to be soldered, with the only application of heat and a single type of solder. Its composition avoids the risk of loss by detachment when applying the flame directly, since the solder remains adhered to the piece.
The use of solder paste has many advantages over the use of traditional solders in the form of wire or pinch, since it allows us to dose precisely, constantly and quickly the amount of solder to be applied. In addition, its great fluidity and malleability make it an exceptional solder.
To use the solder pastes in their entirety, it is necessary to use the appropriate dispensing equipment that we also provide (Ref. SOL086).
IMPORTANT: Standard 3 c.c. syringes are only compatible with the MK3 dispenser (Ref. SOL086) and with the piston for Hilderbrand 3 c.c. syringes (Ref. SOL087).
Characteristics:
- Working temperature: 735ºC
- Density: 14,6 g/cm3
- Color: Yellow
- Powder morphology: Spherical
- Particle size: < 45 microns
- Powder content: 65%.
- Contains flux: Yes
- Type of application: torch, induction
Recommended storage conditions:
It is recommended to keep solder pastes in a cool place away from direct light.
When long term storage is necessary, keep them in the refrigerator. Before using them again, keep them out of the refrigerator until they reach room temperature, in this way they will acquire the proper viscosity to work properly.
The application temperature should not exceed 25°C to avoid dripping of the paste from the syringe. If stored correctly, the shelf life can exceed two years.
- Availability: Pre-order
- Model: SOL149
-
Brand:
