Hilderbrand 9k gold soldering paste. It can be used on different areas of the parts to be soldered, with a single application of heat and a single type of solder. Its composition avoids the risk of loss due to detachment when the flame is applied directly, as the solder is adhered to the part.
The use of solder paste has many advantages over the use of traditional solder in the form of wire or tweezers, as it allows us to dose the amount of solder to be applied precisely, constantly and quickly. In addition, its great fluidity and malleability make it an exceptional solder.
To make full use of solder pastes, you need to use the appropriate dosing equipment, which we also supply (Ref. SOL086).
IMPORTANT: Standard 3 cc syringes are only compatible with the MK3 dispenser (Ref. SOL086) and the Hilderbrand 3 cc syringe piston (Ref. SOL087).
Features:
- Working temperature: 700ºC
- Density: 11.6 g/cm3
- Color: Yellow
- Powder morphology: Spherical
- Particle size: < 75 microns
- Powder content: 65% Powder content: 65
- Contains flux: Yes
- Type of application: Torch, Induction
Recommended storage conditions:
It is recommended to store welding pastes in a cool place away from direct light.
When long-term storage is required, store in the refrigerator. Before using them again, keep them out of the fridge until they reach room temperature, so that they acquire the right viscosity to work properly.
The application temperature must not exceed 25°C to prevent the paste from dripping from the syringe. If stored correctly, the shelf life can exceed two years.
- Availability: Pre-order
- Model: SOL153
-
Brand:
