SIRIO
Sirio 750-L Oven (FUN011)
The 750-L Series oven is an electronic control unit with micro processes and permanent memory.
It is capable of memorizing up to 7 cycles or preheating programs that are stored in the memory until the operator decides to modify them.
Each program contains 4 ramps and for each ramp it is possible to configure up to 3 variables: temperature, rate of increase and maintenance time.
It allows us to program the ignition delay and the extinguishing temperature of the smoke suction fan.
In addition, it is possible to establish a time of maintenance of the final temperature at the end of the cycle, in this way the cylinders are maintained at a certain temperature.
This oven comes in three different versions depending on the size: S, M and L.
Characteristics:
Dimensions: 420 x 530 x 520 mm
Dimensions of the camera: 230 x 300 x 150 mm
Weight: 45 kg
Maximum temperature: 1100ºC
Power supply: 230V - 50/60 Hz
Power: 2800W
Approximate capacity of cylinders (model 3X): 30 cylinders of 45 mm of diameter x 55 mm
Programs: 15
Phases: 6
Quick programs: 5
It is capable of memorizing up to 7 cycles or preheating programs that are stored in the memory until the operator decides to modify them.
Each program contains 4 ramps and for each ramp it is possible to configure up to 3 variables: temperature, rate of increase and maintenance time.
It allows us to program the ignition delay and the extinguishing temperature of the smoke suction fan.
In addition, it is possible to establish a time of maintenance of the final temperature at the end of the cycle, in this way the cylinders are maintained at a certain temperature.
This oven comes in three different versions depending on the size: S, M and L.
Characteristics:
Dimensions: 420 x 530 x 520 mm
Dimensions of the camera: 230 x 300 x 150 mm
Weight: 45 kg
Maximum temperature: 1100ºC
Power supply: 230V - 50/60 Hz
Power: 2800W
Approximate capacity of cylinders (model 3X): 30 cylinders of 45 mm of diameter x 55 mm
Programs: 15
Phases: 6
Quick programs: 5
Sirio 725-L Oven (FUN012)
The 725-L series oven is an electronic control unit with microprocesses and permanent memory.
It has a program for traditional coatings, containing up to 3 ramps (with option of temperature,
rate of temperature rise expressed in °C per minute and holding time) and a program specifically designed for rapid coatings.
This oven comes in three different versions, depending on the size: S, M and L. All these versions can be equipped with smoke extraction.
Characteristics:
Dimensions: 420 x 530 x 520 mm
Camera dimensions: 230 x 300 x 150 mm
Weight: 45kg
Maximum temperature: 1100ºC
Power: 2800W
Approximate cylinder capacity (Model 3X): 30 cylinders of 45 mm diameter x 55 mm
Programs: 1
Phases: 3
Quick programs: 1
Waiting time for cycle start: 100 hours
It has a program for traditional coatings, containing up to 3 ramps (with option of temperature,
rate of temperature rise expressed in °C per minute and holding time) and a program specifically designed for rapid coatings.
This oven comes in three different versions, depending on the size: S, M and L. All these versions can be equipped with smoke extraction.
Characteristics:
Dimensions: 420 x 530 x 520 mm
Camera dimensions: 230 x 300 x 150 mm
Weight: 45kg
Maximum temperature: 1100ºC
Power: 2800W
Approximate cylinder capacity (Model 3X): 30 cylinders of 45 mm diameter x 55 mm
Programs: 1
Phases: 3
Quick programs: 1
Waiting time for cycle start: 100 hours
Sirio 750-M Oven (FUN014)
The Sirio brand is appreciated all over the world for its technical qualities, high performance and design, as well as its competitive prices.
The constant evolution, innovation and technological research allowed this company to position itself positively in the global market.
The 750-M series oven is an electronic control unit with microprocesses and permanent memory.
It is capable of memorizing up to 7 cycles or preheating programs that are stored in memory until the operator decides to modify them.
Each program contains 4 ramps and for each ramp it is possible to configure up to 3 variables: temperature, increase rate and holding time.
It allows us to program the ignition delay and the extinguishing temperature of the smoke suction fan.
Furthermore, it is possible to establish a time for maintaining the final temperature at the end of the cycle, in this way the cylinders are maintained at a certain temperature.
This oven comes in three different versions according to size: S, M and L.
Characteristics:
Dimensions: 360 x 460 x 490 mm
Camera dimensions: 180 x 230 x 115 mm
Weight: 35kg
Maximum temperature: 1100ºC
Power: 230V 50/60 Hz
Power: 2000W
Approximate cylinder capacity (3X model): 20 cylinders of 45 mm diameter x 55 mm
Programs: 15
Phases: 6
Quick Programs: 5
The constant evolution, innovation and technological research allowed this company to position itself positively in the global market.
The 750-M series oven is an electronic control unit with microprocesses and permanent memory.
It is capable of memorizing up to 7 cycles or preheating programs that are stored in memory until the operator decides to modify them.
Each program contains 4 ramps and for each ramp it is possible to configure up to 3 variables: temperature, increase rate and holding time.
It allows us to program the ignition delay and the extinguishing temperature of the smoke suction fan.
Furthermore, it is possible to establish a time for maintaining the final temperature at the end of the cycle, in this way the cylinders are maintained at a certain temperature.
This oven comes in three different versions according to size: S, M and L.
Characteristics:
Dimensions: 360 x 460 x 490 mm
Camera dimensions: 180 x 230 x 115 mm
Weight: 35kg
Maximum temperature: 1100ºC
Power: 230V 50/60 Hz
Power: 2000W
Approximate cylinder capacity (3X model): 20 cylinders of 45 mm diameter x 55 mm
Programs: 15
Phases: 6
Quick Programs: 5
Sirio 725-M Oven (FUN016)
The Sirio brand is appreciated all over the world for its technical qualities, high performance and design, as well as its competitive prices.
The constant evolution, innovation and technological research allowed this company to position itself positively in the global market.
The 725-M series oven is an electronic control unit with micro processes and permanent memory.
It has a program for traditional coatings, containing up to 3 ramps (with temperature option, rate of temperature increase expressed in ºC per minute and holding time) and a program specifically designed for fast coatings.
This oven comes in three different versions depending on the size: S, M and L.
All these versions can be equipped with smoke extraction.
Characteristics:
Dimensions: 360 x 460 x 490 mm
Camera dimensions: 180 x 230 x 115 mm
Weight: 35kg
Maximum temperature: 1100ºC
Power: 2000W
Approximate cylinder capacity (3X model): 20 cylinders of 45 mm diameter x 55 mm
Programs: 1
Phases: 3
Quick programs: 1
Waiting time for cycle start: 100 hours
The constant evolution, innovation and technological research allowed this company to position itself positively in the global market.
The 725-M series oven is an electronic control unit with micro processes and permanent memory.
It has a program for traditional coatings, containing up to 3 ramps (with temperature option, rate of temperature increase expressed in ºC per minute and holding time) and a program specifically designed for fast coatings.
This oven comes in three different versions depending on the size: S, M and L.
All these versions can be equipped with smoke extraction.
Characteristics:
Dimensions: 360 x 460 x 490 mm
Camera dimensions: 180 x 230 x 115 mm
Weight: 35kg
Maximum temperature: 1100ºC
Power: 2000W
Approximate cylinder capacity (3X model): 20 cylinders of 45 mm diameter x 55 mm
Programs: 1
Phases: 3
Quick programs: 1
Waiting time for cycle start: 100 hours
Sirio 750-S Oven (FUN017)
The Sirio brand is appreciated all over the world for its technical qualities, high performance and design, as well as its competitive prices.
The constant evolution, innovation and technological research allowed this company to position itself positively in the global market.
The Series 750-S oven is an electronic control unit with micro processes and permanent memory.
It is capable of memorizing up to 7 cycles or programs stored in memory until the operator decides to modify them.
Each program contains 4 ramps and for each ramp it is possible to configure up to 3 variables: temperature, increase rate and holding time.
It allows us to program the ignition delay and the final temperature of the smoke suction fan.
Furthermore, it is possible to establish a time for maintaining the final temperature at the end of the cycle, in this way the cylinders are maintained at a certain temperature.
It allows us to program the specific working time of the vacuum cleaner.
This oven comes in three different versions according to size: S, M and L.
Characteristics:
Dimensions: 320 x 400 x 470 mm
Camera dimensions: 160 x 160 x 100 mm
Weight: 28kg
Maximum temperature: 1100ºC
Power: 230V? 50/60 Hz
Power: 1500W
Approximate cylinder capacity (3X model): 9 cylinders of 45 mm diameter x 55 mm
Programs: 15
Phases: 6
Quick Programs: 5
The constant evolution, innovation and technological research allowed this company to position itself positively in the global market.
The Series 750-S oven is an electronic control unit with micro processes and permanent memory.
It is capable of memorizing up to 7 cycles or programs stored in memory until the operator decides to modify them.
Each program contains 4 ramps and for each ramp it is possible to configure up to 3 variables: temperature, increase rate and holding time.
It allows us to program the ignition delay and the final temperature of the smoke suction fan.
Furthermore, it is possible to establish a time for maintaining the final temperature at the end of the cycle, in this way the cylinders are maintained at a certain temperature.
It allows us to program the specific working time of the vacuum cleaner.
This oven comes in three different versions according to size: S, M and L.
Characteristics:
Dimensions: 320 x 400 x 470 mm
Camera dimensions: 160 x 160 x 100 mm
Weight: 28kg
Maximum temperature: 1100ºC
Power: 230V? 50/60 Hz
Power: 1500W
Approximate cylinder capacity (3X model): 9 cylinders of 45 mm diameter x 55 mm
Programs: 15
Phases: 6
Quick Programs: 5
Sirio 725-S Oven (FUN018)
The Sirio brand is appreciated all over the world for its technical qualities, high performance and design, as well as its competitive prices.
The constant evolution, innovation and technological research allowed this company to position itself positively in the global market.
The 725-S Series oven is a microprocessor-based electronic control unit consisting of a single program containing up to 3 ramps (option temperature rise rate expressed in °C per minute and holding time) and a program specifically designed to fast cycles.
This oven comes in three different versions depending on the size: S, M and L.
All these versions can be equipped with smoke extraction.
Characteristics:
Dimensions: 320 x 400 x 470 mm
Camera dimensions: 160 x 160 x 100 mm
Weight: 28kg
Maximum temperature: 1100ºC
Power: 1500W
Approximate cylinder capacity (Model 3X): 9 cylinders of 45 mm diameter x 55 mm
Programs: 1
Phases: 3
Quick programs: 1
Waiting time for cycle start: 100 hours
The constant evolution, innovation and technological research allowed this company to position itself positively in the global market.
The 725-S Series oven is a microprocessor-based electronic control unit consisting of a single program containing up to 3 ramps (option temperature rise rate expressed in °C per minute and holding time) and a program specifically designed to fast cycles.
This oven comes in three different versions depending on the size: S, M and L.
All these versions can be equipped with smoke extraction.
Characteristics:
Dimensions: 320 x 400 x 470 mm
Camera dimensions: 160 x 160 x 100 mm
Weight: 28kg
Maximum temperature: 1100ºC
Power: 1500W
Approximate cylinder capacity (Model 3X): 9 cylinders of 45 mm diameter x 55 mm
Programs: 1
Phases: 3
Quick programs: 1
Waiting time for cycle start: 100 hours
Centrifuge Sirio MOD. SR300 (FUN144)
Sirio centrifuge with digital timer and stainless steel double articulated arm.
Characteristics:
Power: 370 W
Dimensions: 60 x 57 x 33 cm
Weight: 43 Kg.
Characteristics:
Power: 370 W
Dimensions: 60 x 57 x 33 cm
Weight: 43 Kg.
Sandblasting Machine SR 921B (POL083)
Sirio sandblasting machines have been designed for the use of aluminum oxide or glass beads when sandblasting or finishing surfaces. The model SR 921B has a module for the abrasive material. It also includes an external suction socket and a pressure regulator.
Characteristics:
Dimensions: 390 x 430 x 430 mm
Weight: 16 kg
Power supply: 230V - 50/60 Hz
Power: 9 W
12 V internal light
Air pressure: 1.5-6 bar
Air consumption: 150-500 liters /min
Application and uses in jewelry:
Indicated for cleaning micro fusion parts and final finishes:
The machine projects the abrasive that we ourselves place in its tank. This allows us to generate different finishes and textures depending on the speed and grain size.
Possibility of combining finishes by applying reservations to the pieces.
Characteristics:
Dimensions: 390 x 430 x 430 mm
Weight: 16 kg
Power supply: 230V - 50/60 Hz
Power: 9 W
12 V internal light
Air pressure: 1.5-6 bar
Air consumption: 150-500 liters /min
Application and uses in jewelry:
Indicated for cleaning micro fusion parts and final finishes:
The machine projects the abrasive that we ourselves place in its tank. This allows us to generate different finishes and textures depending on the speed and grain size.
Possibility of combining finishes by applying reservations to the pieces.
Sandblasting Machine SR 922B (POL084)
Sirio sandblasters have been designed for the use of aluminum oxide or glass beads for finishing metal surfaces or cleaning dental articles. The model SR 922B has two tanks for the abrasive material.
Each tank contains a gun that triggers depending on the chosen material. It also includes an external suction socket that allows us to work in a cleaner environment. It has pressure regulator and pressure gauge.
Characteristics:
Dimensions: 390 x 430 x 430 mm
Weight: 16 kg
Power supply: 230V? 50/60 Hz
Power: 9 W
12 V internal light
Air pressure: 1.5-6 bar
Air consumption: 150-500 liters / min
Application and uses in jewelry:
Indicated for cleaning micro-fusion parts and final finishes:
The machine projects the abrasive that we place in its tank. This allows us to generate different finishes and textures depending on the speed and grain size.
Possibility of combining finishes by applying reservations to the pieces.
Each tank contains a gun that triggers depending on the chosen material. It also includes an external suction socket that allows us to work in a cleaner environment. It has pressure regulator and pressure gauge.
Characteristics:
Dimensions: 390 x 430 x 430 mm
Weight: 16 kg
Power supply: 230V? 50/60 Hz
Power: 9 W
12 V internal light
Air pressure: 1.5-6 bar
Air consumption: 150-500 liters / min
Application and uses in jewelry:
Indicated for cleaning micro-fusion parts and final finishes:
The machine projects the abrasive that we place in its tank. This allows us to generate different finishes and textures depending on the speed and grain size.
Possibility of combining finishes by applying reservations to the pieces.
Sirio PL-160 Polisher (POL092)
The Sirio brand is appreciated around the world for its technical qualities, high performance and design in addition to its competitive prices. Constant evolution, innovation and technological research have allowed this company to position itself positively within the global market.
The brand's PL-160 polisher is used in all finishing and polishing processes for all types of parts. It is silent and does not transmit vibrations. In the conical shafts circular brushes are mounted to polish the pieces, these can be metallic or made of fibers.
This polisher allows you to rotate at two different speeds: 1400 and 2800 RPM. This allows the machine to choose the appropriate speed according to the type of part to be treated. It includes extractors for the right and left side, which allow us to easily change the cone and mount another type of accessory.
Characteristics:
Dimensions: 340 x 200 x 250 mm
Weight: 12 kg
Rotation speed: 1400 and 2800 rpm
Power supply: 220-240V 50/60 Hz
The brand's PL-160 polisher is used in all finishing and polishing processes for all types of parts. It is silent and does not transmit vibrations. In the conical shafts circular brushes are mounted to polish the pieces, these can be metallic or made of fibers.
This polisher allows you to rotate at two different speeds: 1400 and 2800 RPM. This allows the machine to choose the appropriate speed according to the type of part to be treated. It includes extractors for the right and left side, which allow us to easily change the cone and mount another type of accessory.
Characteristics:
Dimensions: 340 x 200 x 250 mm
Weight: 12 kg
Rotation speed: 1400 and 2800 rpm
Power supply: 220-240V 50/60 Hz
Sirio AS-146 Vacuum Cleaner (POL093)
The Sirio brand is appreciated around the world for its technical qualities, high performance and design in addition to its competitive prices. Constant evolution, innovation and technological research have allowed this company to position itself positively within the global market.
This Sirio vacuum cleaner contains a special filtering system for extra fine sand and a high-power bypass motor.
Characteristics:
Dimensions: 390 x 570 mm
Weight: 7.5 kg
Power supply: 230V? 50/60 Hz
Power: 1000W
This Sirio vacuum cleaner contains a special filtering system for extra fine sand and a high-power bypass motor.
Characteristics:
Dimensions: 390 x 570 mm
Weight: 7.5 kg
Power supply: 230V? 50/60 Hz
Power: 1000W
Right Cone For Sirio Polisher (POL101)
Right cone to place in the polisher, fits perfectly to the model PL-160 of the same brand.
Its use is compatible with circular brushes, whether metallic or fiber.
Inner diameter 65mm.
Its use is compatible with circular brushes, whether metallic or fiber.
Inner diameter 65mm.
Protector for Sirio Polisher (POL102)
This Sirio Brand Polisher Dust & Splash Plastic Shielf provides protection and safety during the polishing process.
Characteristics:
Dimensions: 190 x 240 x 270 mm
Characteristics:
Dimensions: 190 x 240 x 270 mm
Sirio SR902 Steam Machine (LIMP009)
The SR902 steam generator has a direct connection to the water supply for a more comfortable filling. With a power consumption of 2200W and an operation of 6 bars of pressure, it offers the functions of both water and steam in the flow control gun that incorporates. It also incorporates safety devices and mechanical safety valve, for a correct control of the state of the resistance and boiler.
Its field of application is extremely broad, being able to use both in the cleaning of jewelry pieces and for dental articles.
Characteristics:
Dimensions: 460 x 320 x 360 mm
Weight: 15 kg
Fluid: Steam Water
Filling: Connected to the hydraulic network
Power: 2200W
Pressure: 6 bar
Boiler capacity: 4 liters
Boiler material: Stainless steel
Power supply: 230 V - 50/60 Hz
Control of levels (min. And max.) In the boiler
Application and uses in jewelry:
Cleaning of jewelery pieces, especially effective with brilliance and gems. Cleans and dries at the same time, offering exceptional results.
Its field of application is extremely broad, being able to use both in the cleaning of jewelry pieces and for dental articles.
Characteristics:
Dimensions: 460 x 320 x 360 mm
Weight: 15 kg
Fluid: Steam Water
Filling: Connected to the hydraulic network
Power: 2200W
Pressure: 6 bar
Boiler capacity: 4 liters
Boiler material: Stainless steel
Power supply: 230 V - 50/60 Hz
Control of levels (min. And max.) In the boiler
Application and uses in jewelry:
Cleaning of jewelery pieces, especially effective with brilliance and gems. Cleans and dries at the same time, offering exceptional results.
Sirio SR900S Steam Machine (LIMP010)
The SR900S steam generator is small and compact. It is manually filled directly with water and heated at high speed.
It is a reliable and ideal machine for continuous operation, in addition its gun with switch and its long and flexible tube make this steam generator one of the most ergonomic.
Characteristics:
Dimensions: 220 x 300 x 500 mm
Weight: 10 kg
Fluid: Steam
Filling: Manual
Power: 2000W
Pressure: 4.5 bar
Boiler capacity: 4 liters
Boiler material: Stainless steel
Power supply: 230 V - 50/60 Hz
Application and uses in jewelry:
Cleaning of jewelery pieces, especially effective with brilliance and gems. Cleans and dries at the same time, offering exceptional results.
It is a reliable and ideal machine for continuous operation, in addition its gun with switch and its long and flexible tube make this steam generator one of the most ergonomic.
Characteristics:
Dimensions: 220 x 300 x 500 mm
Weight: 10 kg
Fluid: Steam
Filling: Manual
Power: 2000W
Pressure: 4.5 bar
Boiler capacity: 4 liters
Boiler material: Stainless steel
Power supply: 230 V - 50/60 Hz
Application and uses in jewelry:
Cleaning of jewelery pieces, especially effective with brilliance and gems. Cleans and dries at the same time, offering exceptional results.
- 1