ESTMON

This equipment has several switches to regulate the different functions: general start, automatic or manual position and automatic (timed) rotation reversal. It also has a 360 -minute march control timer.

It has anti-impact plastic base for any type of vat, in addition to incorporating one and 400 grams of rectified micro needles. It also has a micro needle extractor. Chassis supports and upper ring are made of stainless steel along with fairing.

The equipment is delivered with a turbo.

Characteristics:
External Turbo Measurements: 250 cm high diameter: 310 cm
Approximate internal capacity of turbo: 12 liters.
Frequency variator with vector system (Pot. Precision helium).
Rotation System with Central Scanning
Magnetic gear rotation system
Articulated process for process exchange, micro needles, emptying or cleaning by horizontal displacement of the turbo.
Turbo RPM: approximately 0 to 600, adjustable
AISI-304 E. Scotch stainless steel (equipped with wheels).
Working voltage 230 V. 1.5 hp. 50-60Hz.

Accessories included in the turbo for bright, pre-gain and dry rectification:
Compressor and drainage screen.

Accessories included in the turbo for moist rinning:
Drainage valve and manual drip system (optional dosing pump).

This equipment has several switches to regulate different functions: general initialization, automatic or manual position and automatic timed rotation inversion.
It also has a built-in stopwatch to run the control.

It has a housing base in anti-impact plastic for any type of bowl and 400 grams of needles. It also has a needle extractor.
The chassis supports and top ring are made of stainless steel, along with the fairing.

Maximum load of approximately 1500 grams (variation in size and quality of parts)

Characteristics:
Center sweep rotation system
Frequency inverter with vector system
Possibility of adding an optional turbo polishing system.
AISI-304 E stainless steel fairing. Scotch
Operating voltage 230 V. 1 HP. 50 to 60 Hz.

The Estmon brand has extensive experience and knowledge in manufacturing magnetic polishing equipment for different types and sizes of parts.

Thanks to the use of specially treated stainless steel micro needles, the pieces are completely polished on their entire surface. Estmon guarantees that each piece of equipment has been manufactured according to the highest quality standards.

This equipment has individual switches to regulate different functions: general start-up, automatic or manual position and automatic timed rotation inversion. It also incorporates an electronic timer for push-button operation control.

It has an anti-impact plastic housing base for any type of bucket, in addition to incorporating one and 600 grams of micro tines. It also has a micro-barb extractor. The frame supports and upper ring are made of stainless steel, together with the fairing.

Maximum load of approximately 2600 gr (variation by size and quality of pieces)

Characteristics:
Machine dimensions: 436 x 436 x 285 mm
Tank dimensions: 354 x 325 x 200 mm
Maximum load of 2600 gr
Frequency variation
Rotation system with central sweep
AISI-304 E. Scotch stainless steel fairing
Working voltage 230 V. 1 CV. 50-60 Hz.

This equipment has individual switches to regulate different functions: general start-up, automatic or manual position and automatic timed rotation inversion. It also has a built-in timer for driving control.

It has an anti-impact plastic housing base for any type of bucket, as well as incorporating one and 400 grams of micro tines. It also has a micro-barb extractor. The frame supports and upper ring are made of stainless steel, together with the fairing.

Maximum load of approximately 1500 gr (variation by size and quality of pieces).

Characteristics:
Machine size: 375 x 375 x 285 mm
Tank size: 325 x 265 x 200 mm (12.5 L)
Maximum load of 1500 gr
Rotation system with central sweep
Frequency inverter with vector system
AISI-304 E. Scotch stainless steel fairing
Working voltage 230 V. 1 CV. 50-60 Hz.

The Estmon brand has extensive experience and knowledge in manufacturing magnetic polishing equipment for different types and sizes of parts.

Thanks to the use of specially treated stainless steel micro needles, the pieces are completely polished on their entire surface. Estmon guarantees that each piece of equipment has been manufactured according to the highest quality standards.

This equipment has individual switches to regulate different functions: general start-up and automatic or manual position. It also has a built-in timer for driving control.

It has an anti-impact plastic housing base for any type of bucket, as well as incorporating one and 400 grams of micro tines. It also has a micro-barb extractor. The frame supports and upper ring are made of stainless steel, together with the fairing.

Maximum load of approximately 1500 gr (variation by size and quality of pieces).

Characteristics:
Machine size: 375 x 375 x 285 mm
Tank size: 325 x 265 x 200 mm (12.5 L)
Maximum load of 1500 gr
Rotation system with central sweep
AISI-304 E. Scotch stainless steel fairing
Working voltage 230 V. 0.50 CV. 50-60 Hz. S.P.

The Estmon brand has extensive experience and knowledge in manufacturing magnetic polishing equipment for different types and sizes of parts.
Thanks to the use of specially treated stainless steel micro needles, the pieces are completely polished on their entire surface.
Estmon guarantees that each piece of equipment has been manufactured according to the highest quality standards.
This equipment has individual switches to regulate different functions: general start-up and automatic or manual position. It also has a built-in timer for driving control.
It has an anti-impact plastic housing base for any type of bucket, in addition to incorporating one and 200 grams of micro tines.
The frame supports and upper ring are made of stainless steel, together with the fairing.
Maximum load of approximately 500 gr (variation by size and quality of pieces).

Characteristics:
Machine size: 300 x 300 x 270mm
Tank size: 265 x 165 x 150 mm (4.3 L)
Maximum load of 500 gr
Rotation system with central sweep
AISI-304 E. Scotch stainless steel fairing
Working voltage 230 V. 0.33 CV. 50-60 Hz. S.P.

Tank designed for use with Estmon magnetic polishers, especially the MT-400 A model. With a capacity of 600 gr of micro-tines, it facilitates and optimizes the polishing process of the parts to be treated.

Characteristics:
Tank dimensions: 325 x 265 x 200 mm
Maximum load of pieces: 2,600 gr approx.

Tank designed to be used together with Estmon magnetic polishers, especially the MT-300 and MT-300 A models. With a capacity of 600 gr of micro-tines, it facilitates and optimizes the polishing process of the parts to be treated.

Characteristics:
Tank dimensions: 325 x 265 x 200 mm
Maximum load of pieces: 1,500 gr approx.

Tank  designed to be used together with Estmon magnetic polishers, especially the MT-165 model. With a capacity of 200 gr of micro-tines, it facilitates and optimizes the polishing process of the parts to be treated.

Characteristics:
Tank dimensions: 265 x 165 x 155 mm (4.5 L)
Maximum load of pieces: 500 gr approx.

Ultrasonic cleaning equipment equipped with state-of-the-art technology and ESTMON manufacturing guarantee. Allows you to view and control all the parameters needed to obtain excellent ultrasonic cleaning via the touch keyboard.

These parameters consist of temperature, time, potencies, and advanced functions such as sweep, power-up, and degassing.

Characteristics:
238 x 138 x 65 mm tank
Capacity: 2.2 liters
Heating power: 100W
Ultrasonic power: 160W
Ultrasonic frequency: 37KHz
Number of transducers: 2 x 80 W
Drain Valve: No

External dimensions:
Height: 23cm
Width: 30cm
Bottom: 17cm

This basket was designed to be used inside two ultrasonic equipment.

Characteristics:
Manufactured in stainless steel

Ultrasonic cleaning equipment equipped with leading technology and ESTMON manufacturing guarantee.
It allows to visualize and control by means of touch keyboard all the necessary parameters to obtain an excellent ultrasonic cleaning.

These parameters consist of temperature, time, power and advanced functions such as varring, power increase and degassing.

Characteristics:
238 x 138 x 100mm tank
Capacity: 3 liters
Heating power: 150W
Ultrasonic power: 160W
Ultrasonic frequency: 37KHz
Number of transducers: 2 x 80 W
Drain valve: Yes

External dimensions:
Height: 25cm
Length: 30cm
Bottom: 17cm

Hook holder specially designed to be used together with ultrasonic cleaners.
In it we will place the parts to clean, introducing it inside the tank.

Cup holder designed to be used together with the ultrasound equipment.
In it we will place the parts to be cleaned by introducing it inside the tank.

Dimensions:
18 x 9.5 x 5 cm
21 x 11.5 x 5 cm
27 x 13.5 x 5 cm

The Estmon Electronic Series ultrasonic cleaning equipment is equipped with the latest technology and the ESTMON manufacturing guarantee with more than 30 years of experience in the manufacture of ultrasonic cleaning machines.

The TCE-450 4.5 liter model is equipped with a fully digital multifunction LCD control panel, which allows us to view and control all the parameters necessary to obtain an excellent ultrasonic cleaning using the touch keyboard.

These parameters consist of temperature, time, powers and advanced functions such as sweep, power increase and degassing.

Temperature function
The temperature function allows a precise regulation of the working temperature with a range of 11 steps ranging from 30ºC to 80ºC.

The time function
The time function: allows us to configure the duration of the cleaning cycle in intervals of one minute to one hour.

More functionalities
This model is equipped with a group composed of two powerful latest generation transducers that allow minimizing the power loss in the power transmission process.

Its generators allow working with different cleaning intensities: 40, 70, and 100%. If we also use the advanced PULSE function, it allows us to increase the power to 120%, increasing the performance of the maximum power by 20% more.

Another of the advanced functions that increases the effectiveness of this equipment is the multidirectional sweeping when activating this function modifies the trajectory of the ultrasonic wave creating a crossed sweep that will affect the efficiency of cleaning in areas with extreme dirt and difficult access. .

Last but not least the degassing function, gases are released from the liquid that could limit the cleaning efficiency, facilitating the transmission of the subsonic wave through the liquid.

The equipment is delivered with a lid and drain for emptying the tank. Optionally they have a basket made with high quality materials and finishes meeting all European standards.

Characteristics:
238 x 138 x 150 mm tank
Capacity: 4.5 Liters
Heating power: 220 W
Ultrasonic power: 160 W
Ultrasonic frequency: 37KHz
No. of transducers: 2 x 80 W
Drain valve: Yes

The Estmon Electronic Series ultrasonic cleaning equipment is equipped with the latest technology and the ESTMON manufacturing guarantee with more than 30 years of experience in the manufacture of ultrasonic cleaning machines.

The TCE-600 6-liter model is equipped with a fully digital multifunction LCD control panel, which allows us to view and control all the necessary parameters to obtain excellent ultrasonic cleaning via the touch keyboard. These parameters consist of temperature, time, powers and advanced functions such as sweep, power increase and degassing.

The temperature function: allows precise regulation of the working temperature with a range of 11 steps ranging from 30ºC to 80ºC.

The time function: allows us to configure the duration of the cleaning cycle in intervals of one minute up to one hour.

This model is equipped with a group made up of three powerful latest generation transducers that minimize power loss in the energy transmission process. Its generators allow you to work with different cleaning intensities: 40, 70, and 100%. If we also use the advanced PULSE function, it allows us to increase the power to 120%, increasing the performance of maximum power by 20% more.

Another of the advanced functions that increases the effectiveness of this equipment is the multidirectional sweep. When activating this function, the trajectory of the ultrasonic wave is modified, creating a crossed sweep that will affect the cleaning efficiency in areas with extreme dirt and difficult access. . Last but not least, the degassing function, the gases that could limit the cleaning efficiency are released from the liquid, facilitating the transmission of the subsonic wave through the liquid.

The equipment is delivered with a lid and drain for emptying the tank. Optionally, they have a basket made with high-quality materials and finishes, complying with all European standards.

Optional: Steel cover (LIMP)

Characteristics:
Cuba of 302 x 152 x 150 mm
Capacity: 6 Liters
Heating power: 270W
Ultrasonic power: 240W
Ultrasonic Frequency: 37KHz
Number of transducers: 3 x 80 W
Drain valve: Yes

The TCE-1500 15-liter model is equipped with a fully digital multifunction LCD control panel, which allows us to view and control all the necessary parameters to obtain an excellent ultrasonic cleaning using the touch keyboard.

These parameters consist of temperature, time, powers and advanced functions such as sweep, power increase and degassing.

Temperature function
The temperature function allows a precise regulation of the working temperature with a range of 11 steps ranging from 30ºC to 80ºC.

Time function
The time function allows us to set the duration of the cleaning cycle in intervals from one minute to one hour.

More functionalities
This model is equipped with a group made up of six powerful latest generation transducers that allow minimizing the power loss in the power transmission process.

Its generators allow working with different cleaning intensities: 40, 70, and 100%. The advanced PULSE function allows us to increase the power to 120%, increasing the performance of the maximum power by 20% more.

Another of the advanced functions that increases the effectiveness of this equipment is the multidirectional sweeping. When activating this function modifies the trajectory of the ultrasonic wave creating a crossed sweep that will affect the efficiency of cleaning in areas with extreme dirt and difficult access.

Last but not least the degassing function, gases are released from the liquid that could limit the cleaning efficiency, facilitating the transmission of the subsonic wave through the liquid.

The equipment is delivered with a lid and drain equipped with a filter for emptying the tank, which has the function of preventing the loss of small parts and avoiding possible obstructions by them.

Optionally they have a basket made with high quality materials and finishes, complying with all European standards.

Characteristics:
325 x 295 x 150mm tank
Capacity: 15 Liters
Heating power: 470 W
Ultrasonic power: 480W
Ultrasonic frequency: 37KHz
No. of transducers: 6 x 80W
Drain valve: Yes