Português
DREHER
Dreher S-70 Mechanical Grinding Compound 25 Kg (POL327)
Dreher's S-70 mechanical roughing compound has the property of performing a roughing process on the surface of the pieces, which is absolutely essential to carry out the next polishing step, being the beginning of the cycle that will end with the last polishing process final.
Especially suitable for noble metal alloys such as 9 and 18 k gold and silver. It is also suitable for very hard metals such as nickel and titanium.
How to use:
The pan should be filled with water to equal the level of the chips and plastic or ceramic chopsticks.
The amount of product depends a lot on how the pieces are and the quantity, we recommend starting with a tablespoon and adding more of the product depending on the result obtained with the initial dose.
Storage Mode:
Store according to local legislation. Observe the indications of the tag. Store the containers between 5 and 35 ° C in a dry and well-ventilated place, away from sources of heat and direct sunlight.
Keep away from oxidizing agents and strongly acidic or alkaline materials.
Especially suitable for noble metal alloys such as 9 and 18 k gold and silver. It is also suitable for very hard metals such as nickel and titanium.
How to use:
The pan should be filled with water to equal the level of the chips and plastic or ceramic chopsticks.
The amount of product depends a lot on how the pieces are and the quantity, we recommend starting with a tablespoon and adding more of the product depending on the result obtained with the initial dose.
Storage Mode:
Store according to local legislation. Observe the indications of the tag. Store the containers between 5 and 35 ° C in a dry and well-ventilated place, away from sources of heat and direct sunlight.
Keep away from oxidizing agents and strongly acidic or alkaline materials.
Mechanical Polishing Compound C-168 25 KG (POL326)
Dreher's C-168 powder compound for shining and mechanical polishing is especially indicated for the polishing and polishing process of pieces made of silver, 8-9 carat gold, steel, stainless steel, nickel, titanium and platinum.
How to use:
Immerse the gold and / or silver pieces in a solution of 50 grams of product per liter of water.
How to use:
Immerse the gold and / or silver pieces in a solution of 50 grams of product per liter of water.
Dreher C-6 Mechanical Polishing Compound 25 KG (POL325)
Dreher C-6 liquid mechanical polishing compound is indicated for the polishing process of parts made of 18 and 14 k gold and different silver alloys.
Its excellent fluidity is especially effective when used with stainless steel balls, sticks, satellites and micro tines and in the novel ceramic and PVC materials used in the latest mechanical polishing technologies.
How to use:
Immerse the gold and / or silver pieces in a solution of 30 ml of product per liter of water.
Storage method
Store according to local legislation.
Observe the indications of the tag.
Store the containers between 5 and 35 ° C, in a dry and well-ventilated place, away from sources of heat and direct sunlight.
Keep away from ignition points. Keep away from oxidizing agents and strongly acidic or alkaline materials.
No Smoking.
Once the containers are opened, they must be carefully resealed and placed vertically to avoid spillage.
Its excellent fluidity is especially effective when used with stainless steel balls, sticks, satellites and micro tines and in the novel ceramic and PVC materials used in the latest mechanical polishing technologies.
How to use:
Immerse the gold and / or silver pieces in a solution of 30 ml of product per liter of water.
Storage method
Store according to local legislation.
Observe the indications of the tag.
Store the containers between 5 and 35 ° C, in a dry and well-ventilated place, away from sources of heat and direct sunlight.
Keep away from ignition points. Keep away from oxidizing agents and strongly acidic or alkaline materials.
No Smoking.
Once the containers are opened, they must be carefully resealed and placed vertically to avoid spillage.
Antioxidant for Balls and Needles (POL323)
Dreher's F-7 Antioxidant compound for balls, needles, satellites used in mechanical polishing processes.
This compound ensures cleaning and protection against oxidation, also clearing the dirt acquired during the work cycle and contributing to proper storage when tools are not used for a long time.
Way of use:
Application: We will immerse the balls and other elements in a solution containing 70 gr. from F-7 per liter.
Oxidation Cleaning: We will carry the drum with the oxidized elements, spinning them for two hours to subsequently wash the tank.
We will repeat this cycle as many times as necessary until the oxidized elements recover their initial appearance.
Cleaning the acquired dirt during the work cycle: This is very important to get the best possible results. If the spheres and other elements are dirty, they will not transmit the spectacular shine of stainless steel spheres. And the result will be bad, dull.
The method is the same as the previous but shorter: we will perform two cycles of approximately fifteen minutes.
Storage Method: Store in accordance with local legislation. Observe the instructions on the label. Store containers between 5 and 35 ° C, in a dry, well -ventilated place, far from heat sources and direct sunlight. Keep away from the ignition points. Keep away from oxidizing agents and materials strongly acidic or alkaline.
Once opened, containers should be carefully closed again and placed vertically to avoid spills.
Container: 25 kg
This compound ensures cleaning and protection against oxidation, also clearing the dirt acquired during the work cycle and contributing to proper storage when tools are not used for a long time.
Way of use:
Application: We will immerse the balls and other elements in a solution containing 70 gr. from F-7 per liter.
Oxidation Cleaning: We will carry the drum with the oxidized elements, spinning them for two hours to subsequently wash the tank.
We will repeat this cycle as many times as necessary until the oxidized elements recover their initial appearance.
Cleaning the acquired dirt during the work cycle: This is very important to get the best possible results. If the spheres and other elements are dirty, they will not transmit the spectacular shine of stainless steel spheres. And the result will be bad, dull.
The method is the same as the previous but shorter: we will perform two cycles of approximately fifteen minutes.
Storage Method: Store in accordance with local legislation. Observe the instructions on the label. Store containers between 5 and 35 ° C, in a dry, well -ventilated place, far from heat sources and direct sunlight. Keep away from the ignition points. Keep away from oxidizing agents and materials strongly acidic or alkaline.
Once opened, containers should be carefully closed again and placed vertically to avoid spills.
Container: 25 kg
- 1