Português
CASTALDO
10 Rolls Castaldo Gold Label 22.7 Kg (FUN196)
Castaldo Gold Label rubber is especially suitable for making molds with a high level of detail. This allows the wax-injected part to maintain the exact shape of the original vulcanized part. Its high flexibility allows extracting the most delicate models.
The rubber appears protected on both sides, one with yellow fabric and the other with blue plastic. Generally, yellow fabric can be used to annotate the pattern, so it is important to place it on the top face of the pattern. On the rest of the plates used, we will extract the two protectors.
Store in a cool, ventilated place, away from direct light and at a temperature of approximately 21ºC.
Characteristics:
Vulcanized temperature: 150-160ºC
Vulcanization time: 7.5 minutes per 3.2 mm layer.
Weight per roll: 2270 grams
The rubber appears protected on both sides, one with yellow fabric and the other with blue plastic. Generally, yellow fabric can be used to annotate the pattern, so it is important to place it on the top face of the pattern. On the rest of the plates used, we will extract the two protectors.
Store in a cool, ventilated place, away from direct light and at a temperature of approximately 21ºC.
Characteristics:
Vulcanized temperature: 150-160ºC
Vulcanization time: 7.5 minutes per 3.2 mm layer.
Weight per roll: 2270 grams
Castaldo Gold Label Roll 2.27 Kg (FUN021)
Castaldo Gold Label rubber is especially suitable for making molds with a high level of detail.
This allows the wax-injected part to retain the exact shape of the original vulcanized part.
Its high flexibility allows extracting the most delicate models.
The rubber is protected on both sides, one of them with yellow cloth and the another blue plastic.
Generally, the yellow cloth can be used to make annotations of the mold, that is why it is important to place it on the upper face of it.
In the rest of the plates used, we will remove both protectors.
Keep in a cool and ventilated place, away from direct light and at an approximate temperature 21 ºC.
Characteristics:
Vulcanizing temperature: 150-160ºC
Vulcanizing time: 7.5 minutes per 3.2mm layer.
This allows the wax-injected part to retain the exact shape of the original vulcanized part.
Its high flexibility allows extracting the most delicate models.
The rubber is protected on both sides, one of them with yellow cloth and the another blue plastic.
Generally, the yellow cloth can be used to make annotations of the mold, that is why it is important to place it on the upper face of it.
In the rest of the plates used, we will remove both protectors.
Keep in a cool and ventilated place, away from direct light and at an approximate temperature 21 ºC.
Characteristics:
Vulcanizing temperature: 150-160ºC
Vulcanizing time: 7.5 minutes per 3.2mm layer.
- 1